Searching for entries matching supertrend, looking in keywords for any words Found 10 matching entries
Entries
1917
Fat Tails
Version 2.0*) October 15, 2017
The SuperTrend indicator is an application of the concept of MAE (maximum adverse excursion), which was introduced by John Sweeney in the mid-nineties. It is a Stop-And-Reverse (SAR) indicator based on breakouts from a modified Keltner channel.
The SuperTrendM11 is an enhanced version of the original SuperTrend indicator that comes with the following modifications:
- The moving average has been replaced with a more robust median.
- The median is calculated one bar ago to avoid recalculating with each incoming tick.
- The average true range (ATR) is calculated one bar ago to avoid recalculating with each incoming tick.
In fact there is no point in moving a trailing stop towards the current price intra-bar. Therefore a trailing stop should always be calculated from the prior bar and not the last price.
This version of the SuperTrend can be set to revert intra-bar or at the bar close. With default settings the stop line is only broken, when there is a bar close beyond the stop. The indicator comes with paint bars and sound alerts.
The SuperTrend is a trend indicator, which can be used in various ways. It is best used as a trailing stop or as a trend filter. It can also be used as a stop-and-reverse indicator, but will only work as such in trending markets. Typically it will allow for profitable results while the market is trending and then give the money back in sideways markets.
Note: The SuperTrend M11 has the trend exposed as a public property. This property can be accessed programmatically. However, it cannot be currently accessed via the market analyzer. In order to access the Trend series via the market analyzer, a specific MarketAnalyzerColumn is required. The MarketAnalyzerColumn is not yet included with the install file, as it has led to freezes with NT 8.0.8.0. The bug has been confirmed by NinjaTrader developers and only fixed with the latest release NT 8.0.9.0. (issue #12054). The market analyzer column and sound files for the SuperTrend M11 will be available with a future update.
*) Unfortunately, the forum software always renames zip files to match the original file name. Therefore the zip file refers to a prior version of the amaSuperTrendM11. Be assured that the zip file contains the indicator version referenced in the headline.
Please download the new Supertrend U11 (Universal), which allows to calculate the stop line from median, mode and 27 other moving averages.
This is a new implementation of the TradeStation SuperTrend indicator for NinjaTrader 7. The SuperTrend indicator is an application of the concept of MAE (maximum adverse excursion), which was introduced by John Sweeney in the mid-nineties.
The SuperTrend M11 is particularly stable and has a few advantages over other SuperTrend indicators:
It uses a moving (statistical) median of the arithmetic mean (High + Low)/2 of the bars instead of a moving average. The (statistical) median is known to be more robust than any average.
It calculates both the Median and the ATR (average true range) 1 bar ago, whereas the original SuperTrend indicator takes the ATR and moving average of the current bar. If you use the current bar's ATR, the current bar's breakout is partly measured against its own range. This is particularly true, if the ATR period is short.
Accessing the trend: The indicator comes with a BoolSeries that holds the trend. This BoolSeries can be accessed by other indicators or automated strategies.
Reverse Intra-bar = false: This is the default setting of the indicator. A logical signal will be generated when the close of the signal bar has taken out the stop line. The position may be reversed at the open of the next bar. The paint bars will only change colors for the bar after the signal bar. The arrow will be also plotted for the entry bar.
Reverse Intra-bar = true: This is an unusual setting for the SuperTrend. The signal will be generated with the first tick that has plotted on the other side of the stop line. In this case the position may be reversed intra-bar for the signal bar. Paintbars and arrows will already plot for the signal bar.
Paintbars: The indicator has an option to display the current trend via paintbars. Downclose bars are filled, upclose bars are hollow. For the upclose bars an opacity can be selected for better visibility.
Arrows: The indicator has an option to display trend changes via an arrow.
Sound alerts: The indicator will alert to trend reversals and potential trend reversals. A potential trend reversal occurs when price touches the stop line intra-bar prior to the confirmation by a close on the other side of the stop line. The sound files are included with the indicator install file. Please unzip and copy them into the program files (x86)\ NinjaTrader 7\ sounds directory or whatever directory is used by NinjaTrader to store the sound files.
Comparison between SuperTrend M1 and SuperTrend M11:
The SuperTrend M11 calculates both the average true range and the median 1 bar ago. This results in a considerable saving in CPU load, if you use the indicators in CalculateOnBarClose = false mode. The SuperTrend M11 does the median calculation only once per bar, while the SuperTrend M1 recalculates it with every incoming tick. If you use the indicator with CalculateOnBarClose = true setting, you can also continue to use the SuperTrend M1. There will be no significant difference in performance.
Changed formula: The Supertrend M11 will give slightly different results, when compared with the Supertrend M1. If you want to reproduce the settings of your Supertrend M1, you should use the same value for the ATR period and the ATR multiplier, but reduce the value for the median period by 1. The result will still not be identical. Also for both indicators a minimum size for the ATR values has been imposed, the ATR may not be smaller than the ticksize. This is only important for lower timeframes during low volatility and prevents the SuperTrend from changing the trend too often.
SuperTrend M1: The indicator package contains an updated version of the SuperTrend M1. However, I recommend to switch to SuperTrend M11.
Update August 10, 2011 : Visual design improved. The new indicator version can also be called by other indicators and strategies.
Update May 23, 2012: Entirely recoded version, which uses Median and ATR 1 bar ago to avoid recalculation with every tick. Sound alerts added that trigger intra-bar and which can be used on replay. Smaller improvements added.
Update May 24, 2012: Bug removed, upclose candles were not plotting properly.
Update June 30, 2012: New SuperTrend U11 "Universal" released, this is a new indicator - see link for more information
Update October 2, 2012: Indicator simplified. Trend state can no longer change intra-bar.
Update October 3, 2012: Indicator now allows for displacement. BoolSeries modified for accessing the trend. Trend change intra-bar is possible with option reverse intra-bar and COBC = false.
Update March 5, 2013: Arrows now plotting one bar earlier for the option Reverse intra-bar = true.
This is a new implementation of the TradeStation SuperTrend indicator for NinjaTrader 7. The SuperTrend indicator is an application of the concept of MAE (maximum adverse excursion), which was introduced by John Sweeney in the mid-nineties. The SuperTrend can be viewed as a trailing stop and changes direction, when the trailing stop is taken out.
The SuperTrend U11 calculates both the baseline and the offset 1 bar ago, as did the SuperTrend M11. This is to reduce CPU load and avoid feedback loops.
Accessing the trend: The indicator comes with a BoolSeries that holds the trend. This BoolSeries can be accessed by other indicators or automated strategies.
Reverse Intra-bar = false: This is the default setting of the indicator. A logical signal will be generated when the close of the signal bar has taken out the stop line. The position may be reversed at the open of the next bar. The paint bars will only change colors for the bar after the signal bar. The arrow will be also plotted for the entry bar.
Reverse Intra-bar = true: This is an unusual setting for the SuperTrend. The signal will be generated with the first tick that has plotted on the other side of the stop line. In this case the position may be reversed intra-bar for the signal bar. Paintbars and arrows will already plot for the signal bar.
Paintbars: The indicator has an option to display the current trend via paintbars. Downclose bars are filled, upclose bars are hollow. For the upclose bars an opacity can be selected for better visibility.
Arrows: The indicator has an option to display trend changes via an arrow.
Sound alerts: The indicator will alert to trend reversals and potential trend reversals. A potential trend reversal occurs when price touches the stop line intra-bar prior to the confirmation by a close on the other side of the stop line. The sound files are included with the indicator install file. Please unzip and copy them into the program files (x86)\ NinjaTrader 7\ sounds directory or whatever directory is used by NinjaTrader to store the sound files.
Comparing Supertrend U11 to Supertrend M11:
The SuperTrend U11 is a generalization of the SuperTrend M11.
-> The SuperTrend M11 uses the moving median of the arithmetic mean (High + Low)/2 one bar ago and adds/subtracts a multiple of the average true range one bar ago.
-> The SuperTrend U11 allows you to use the median as above , but instead you can also calculate the baseline from a selection of other indicators. These are the options available for the baseline
- a moving median
- a moving mode
- an ADXVMA
- a 2-pole Butterworth filter
- a 3-pole Butterworth filter
- a DEMA (double exponential MA)
- a DSMA (double simple MA)
- a DTMA (double triangular MA)
- a DWMA (double weighted MA)
- an Ehlers filter
- an EMA
- a 2-pole Gauss filter
- a 3-pole Gauss filter
- a 4-pole Gauss filter
- a HMA (Hull MA)
- a Holt EMA
- a Linear Regression indicator
- a LLMA (phase set to 0)
- a SMA
- a 2-pole Supersmoother
- a 3-pole Supersmoother
- a TEMA (triple exponential MA)
- a TMA (triangular MA)
- a TSMA (triple simple MA)
- a TWMA (triple weighted MA)
- a VWMA(volume weighted MA)
- a WMA (weighted MA)
- a ZeroLagHATEMA
- a ZeroLagTEMA
- a ZLEMA
While the SuperTrend M11 uses the average true range as an offset, the offset for the SuperTrend U11, can be selected as
- a moving average (or median, mode) of the simple range
- a moving average (or median, mode) of the true range
- the standard deviation
The added options will not slow down the indicator, as the selection becomes effective, when the indicator is added.
You can reproduce the SuperTrend M11 with the SuperTrend U11, if you apply it to the arithmetic mean (Median in NinjaSpeak) and select "Median" for the baseline, "EMA" for offset smoothing and "True Range" for offset type. However you need to take into account that the ATR uses Wilder's exponential smoothing (smoothing constant k = 1/n) which is different from the EMA (smoothing constant k = 2/(n+1)). For example an offset period of 8 for the SuperTrend M11 will produce a smoothing factor of 1/8 and translate to an offset period of 15 for the SuperTrend U11.
Update July 3, 2012: ADXVMA option for baseline added.
Update July 5, 2012: Bug removed - Butterworth, Gauss and Supersmoother Fillter did not use the specified baseline period.
Update August 17, 2012: Old version of ADXVMA replaced with new version.
Update August 31, 2012: Ehlers filter updated.
Update October 2, 2012: Indicator simplified. Trend state can no longer change intra-bar. Gaussian and Ehlers filters updated. Mode removed from options.
Update October 3, 2012: Indicator now allows for displacement. BoolSeries modified for accessing the trend. Trend change intra-bar is possible with option reverse intra-bar and COBC = false.
Update March 5, 2013: Arrows now plotting one bar earlier for the option Reverse intra-bar = true.
For the last three updates you also need to update Bollinger Universal & Keltner Universal, if you have them installed. Please remove old versions of those indicators first.
Added an EMA to the Standard SuperTrend Simple (ST) in order to allow the ST to be used in conjunction with other indicators in an auto-strategy. The EMA needs to be set at '1'. When prices are rising the EMA will equal the value of the Down Trend Line (Red on top) and allow for a trigger of a strategy using other indicators in conjunction with the ST. Ergo when prices are falling the EMA will = the value of the Up Trend Line (Green on bottom). This indicator will also work as a stand alone exactly as original ST does in a strategy.
//*** This is a tradestation version of the code Big Mike and Fat Tails have
uploaded here. I made several modifications as well. The sample
picture is inspired from BMT traders and many sharky templates.
//*** The sample picture contains Super trend and Double WMA Ultra Grad
Version 1: Modified Jan 2012 for tradestation ELD ***********
//**** added up dn color, added single or multi dot ***********
//**** added median price moving average logic
Supertrend indicator is based around average true range. Green indicates a bullish trend and red indicates a bearish trend. The indicator parameters let you set the atr length and multiplier.
This is my own interpretation of the popular SuperTrend indicator.
It is a function and an indicator, so you can also easily use it to generate signals.
To get the desired Indicator effect and control over plot colors that I wanted, I made Plot1 and Plot2 a real plot so you could precisely control the RGB color. You need to mark these plots as invisible once you setup the indicator! I will provide a screen shot below as an example.
Plot3 is the real plot, and it will be colored based on if trend is up or down.
SuperTrend uses ATR (average true range) to identify when the trend has changed direction. You can combine this with multiple moving average types to smooth the averages, and you are left with a super effective indicator that can be used to:
- Used to paint bars
- Used to show stop/reverse lines
June 28th, 2020 08:53 PM naphtalicapital Thanks for posting. You did a great job. Unfortunately when i tries importing into NT8 it said the file is for an older
version. Do you have NT8 version?
May 25th, 2020 12:46 PM OutATime This is great, thanks for your efforts!
January 1st, 2018 05:47 AM Trini Thanks.
July 13th, 2017 01:51 PM delta9100
November 21st, 2016 11:23 AM tapit69 Super with other MA's Thanks
May 30th, 2016 05:47 PM sblanco1978 Hello, would you happen to make changes to this script so that it draws arrows when its time to buy/sell? Also, to play
a wav file whenever an arrow is drawn?
Thank you! Excellent work with this script.
May 24th, 2016 09:15 PM Zephyr Thank you very much for sharing. I LOVE this indicator! You've done great work!
December 23rd, 2014 12:46 PM WattMan Thanks for sharing this!
July 26th, 2012 01:51 PM desitrader Hi, Is this still working ?
It is not plotting the SuperTrend. I set the ShowPlots to True bust still it is not displaying the supertrend ( I can se
e the iUpTrend & iDownTend but not iSuperTrend)