Search

Categories

Show

Help

Search Results

Searching for entries matching rth, looking in keywords for any words
Found 13 matching entries

Page 1 of 2

Entries

Session Pivots Monthly (amaPivotsMonthly)

Version 2.6 July 4, 2018

The Session Pivots Monthly is an enhanced pivots indicator which allows for displaying floor pivots, wide pivots, Jackson Zones and Fibonacci pivots.

All pivots are calculated from daily bars (default setting) or from the bar series that has been selected as input series. The indicator may be used to display ETH pivots on an full session chart or RTH pivots on a regular session chart. It is not designed to display RTH pivots on a full session chart. When pivots are calculated from daily bars, they are typically calculated from the full session high, the full session low and the settlement price. However, the daily data depends on the data supplier and reflects the daily high, low and close as shown on a daily chart.

Pivot range: The indicator is set to display the pivot range which is the range between CP and DP. The pivot range is a symmetrical range around the main pivot PP. A wide pivot range follows after a trending month with a close near the highs or the lows. A narrow pivot range indicates that the prior month was a balancing month and closed near the central pivot.

Prior month high, low and close: The indicator also displays the high, low and close for the prior trading month. These levels often act as support or resistance during the current trading month. Moreover, prior month high, low and close reflect the input data for calculating all pivot values and can be visually checked against the chart bars, while this is not possible for the pivots themselves.

Pivot formulas:

All options: H = prior month high, L = prior month low, C = prior month close, X = H - L
Main Pivot: P = (H+L+C)/3
Central Pivot: CP = (H+L)/2
Directional Pivot: DP = 2*P - CP
Floor Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R1 + X, S3 = S1 - X, R4 = R3 + (P-L), S4 = S3 - (H-P)
Wide Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R2 + X, S3 = S2 - X, R4 = R3 + X, S4 = S3 - X
Jackson Zones: R1 = P + 0.5*X, S1 = P - 0.5*X, RB1 = P + 0.618*X, SB1 = P - 0.618*X, R2 = P + X, S2 = P - X, RB2 = P + 1.382*X, SB2 = P - 1.382*X
Fibonacci Pivots: R1 = P + 0.382*X, S1 = P - 0.382*X, R2 = P + 0.618*X, S2 = P - 0.618*X, R3 = P + X, S3 = P - X, R4 = P + 1.382*X, S4 = P - 1.382*X

Update version 2.6.: Enhanced CPU efficiency. Minor changes.

Nota: The forum software has renamed the downloadable zip file to the false version number 2.0. Please disregard the version number of the zip file. The zip file contains the indicator version as specified above.

Category NinjaTrader 8 Indicators and More

Details: Session Pivots Monthly (amaPivotsMonthly)
Category: NinjaTrader 8 Indicators and More

October 21st, 2017
Size: 12.59 KB
Downloaded: 1458 times

Keywords: eth fibonacci floor floorpivots jackson monthly pivotrange pivots range rth session settlement

Session Pivots Weekly (amaPivotsWeekly)

Version 2.6 July 4, 2018

The Session Pivots Weekly is an enhanced pivots indicator which allows for displaying floor pivots, wide pivots, Jackson Zones and Fibonacci pivots.

All pivots are calculated from daily bars (default setting) or from the bar series that has been selected as input series. The indicator may be used to display ETH pivots on an full session chart or RTH pivots on a regular session chart. It is not designed to display RTH pivots on a full session chart. When pivots are calculated from daily bars, they are typically calculated from the full session high, the full session low and the settlement price. However, the daily data depends on the data supplier and reflecta the daily high, low and close as shown on a daily chart.

Pivot range: The indicator is set to display the pivot range which is the range between CP and DP. The pivot range is a symmetrical range around the main pivot PP. A wide pivot range follows after a trending week with a close near the highs or the lows. A narrow pivot range indicates that the prior week was a balancing week and closed near the central pivot.

Prior week high, low and close: The indicator also displays the high, low and close for the prior trading week. These levels often act as support or resistance during the current trading week. Moreover, prior week high, low and close reflect the input data for calculating all pivot values and can be visually checked against the chart bars, while this is not possible for the pivots themselves.

Pivot formulas:

All options: H = prior week high, L = prior week low, C = prior week close, X = H - L
Main Pivot: P = (H+L+C)/3
Central Pivot: CP = (H+L)/2
Directional Pivot: DP = 2*P - CP
Floor Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R1 + X, S3 = S1 - X, R4 = R3 + (P-L), S4 = S3 - (H-P)
Wide Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R2 + X, S3 = S2 - X, R4 = R3 + X, S4 = S3 - X
Jackson Zones: R1 = P + 0.5*X, S1 = P - 0.5*X, RB1 = P + 0.618*X, SB1 = P - 0.618*X, R2 = P + X, S2 = P - X, RB2 = P + 1.382*X, SB2 = P - 1.382*X
Fibonacci Pivots: R1 = P + 0.382*X, S1 = P - 0.382*X, R2 = P + 0.618*X, S2 = P - 0.618*X, R3 = P + X, S3 = P - X, R4 = P + 1.382*X, S4 = P - 1.382*X

Update version 2.6.: Enhanced CPU efficiency. Minor changes.

Nota: The forum software has renamed the downloadable zip file to the false version number 2.0. Please disregard the version number of the zip file. The zip file contains the indicator version as specified above.

Category NinjaTrader 8 Indicators and More

Details: Session Pivots Weekly (amaPivotsWeekly)
Category: NinjaTrader 8 Indicators and More

October 21st, 2017
Size: 12.55 KB
Downloaded: 1645 times

Keywords: eth fibonacci floor floorpivots jackson pivotrange pivots range rth session settlement weekly

Session Pivots Daily (amaPivotsDaily)

Version 2.6 July 4, 2018

The Session Pivots Daily is an enhanced pivots indicator which allows for displaying floor pivots, wide pivots, Jackson Zones and Fibonacci pivots.

All pivots are calculated from daily bars (default setting) or from the bar series that has been selected as input series. The indicator may be used to display ETH pivots on an full session chart or RTH pivots on a regular session chart. It is not designed to display RTH pivots on a full session chart. When pivots are calculated from daily bars, they are typically calculated from the full session high, the full session low and the settlement price. However, the daily data only depends on the data supplier and will reflect the high, low and close as shown on a daily chart.

Workaround for displaying RTH pivots on a full session chart:

- Add a secondary bar series to your primary price panel with a RTH trading hours template.
- Set the colors for candle outlines, candle wicks, up and down bars to transparent.
- Apply the amaPivotsDaily indicator to the secondary bar series.

The indicator will now display RTH pivots on a full session chart. However, the pivots will only be displayed after the start of the regular session.

Pivot range: The indicator is set to display the pivot range which is the range between CP and DP. The pivot range is a symmetrical range around the main pivot PP. A wide pivot range follows after a trending day with a close near the highs or the lows. A narrow pivot range indicates that the prior day was a balancing day and closed near the central pivot.

Prior day high, low and close: The indicator also displays the high, low and close for the prior trading day. These levels often act as support or resistance during the current trading day. Moreover, prior day high, low and close reflect the input data for calculating all pivot values and can be visually checked against the chart bars, while this is not possible for the pivots themselves.

Pivot formulas:

All options: H = prior day high, L = prior day low, C = prior day close, X = H - L
Main Pivot: P = (H+L+C)/3
Central Pivot: CP = (H+L)/2
Directional Pivot: DP = 2*P - CP
Floor Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R1 + X, S3 = S1 - X, R4 = R3 + (P-L), S4 = S3 - (H-P)
Wide Pivots: P = (H+L+C)/3, R1 = 2*P - L, S1 = 2*P - H, R2 = P + X, S2 = P - X, R3 = R2 + X, S3 = S2 - X, R4 = R3 + X, S4 = S3 - X
Jackson Zones: R1 = P + 0.5*X, S1 = P - 0.5*X, RB1 = P + 0.618*X, SB1 = P - 0.618*X, R2 = P + X, S2 = P - X, RB2 = P + 1.382*X, SB2 = P - 1.382*X
Fibonacci Pivots: R1 = P + 0.382*X, S1 = P - 0.382*X, R2 = P + 0.618*X, S2 = P - 0.618*X, R3 = P + X, S3 = P - X, R4 = P + 1.382*X, S4 = P - 1.382*X

CME holidays: There are six holiday sessions every year which are integrated with the following trading day. These holidays are Martin Luther King Day, President's Day, Memorial Day, Independence Day, Labor Day and Thanksgiving. The holiday sessions do not qualify as trade dates and there is no settlement. For this reason quality data feeds will not show daily bars. When "Input Data" is set to "DailyBars", the amaPivotsDaily will correctly calculate the pivots for both the holiday sessions and the trading day that follows the holiday. The NinjaTrader in-built pivots indicator will produce false values on the days after the holiday session. When "Input Data" is set to "Full Session", both indicators will calculate false values for the day after the holiday session.

Comparison to pivot indicators coded for NinjaTrader 7: For NinjaTrader 7 I had used subdivided session templates for calculating RTH pivots on full session charts. This approach was too complicated and mainly confused users. Subdivided session templates also truncate all bars at the session begin and the session end, which in turn distorts other indicators such as moving averages or oscillators. Therefore all our NT8 indicators are now compatible with the default trading hours template <instrument settings>. However, the new approach makes the task of coding RTH pivots for full session charts more complex. Such an indicator needs to add a third bar series with minute data and also come with a small data base containing the regular trading hours and holidays for the most liquid futures contracts. This can no longer be provided free of charge.

On the other hand the pivot indicators for NinjaTrader 8 have become more reliable. Preloading of daily data is no longer necessary, as the pivots indicator will load daily data automatically, when applied to a chart. This makes the pivots easier to use and less error prone.

Update version 2.1.: Bug removed. Indicator did not display pivots calculated from daily data, when the first day of the lookback period of the chart was a trading day without daily settlement (see six holiday sessions listed above).
Update version 2.6.: Enhanced CPU efficiency. Minor changes.

Nota: The forum software has renamed the downloadable zip file to the false version number 2.0. Please disregard the version number of the zip file. The zip file contains the indicator version as specified above.

Category NinjaTrader 8 Indicators and More

Details: Session Pivots Daily (amaPivotsDaily)
Category: NinjaTrader 8 Indicators and More

October 21st, 2017
Size: 12.29 KB
Downloaded: 3265 times

Keywords: daily eth fibonacci floor floorpivots jackson pivotrange pivots range rth session settlement

JBTimeWindowHighlight

Really simple indicator that highlights the specified time window on the chart. Useful for differentiating RTH sessions from ETH sessions. Just add the indicator to your chart, set the time window (in your local time) and highlight color.

Version: 1.0

Category NinjaTrader 8 Indicators and More

Details: JBTimeWindowHighlight
Category: NinjaTrader 8 Indicators and More

July 9th, 2016
Size: 1.73 KB
Downloaded: 697 times

Keywords: eth indicator nt8 rth time highlight

SessionVWAP Bimonthly/Quarterly/Annual V43

Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later

The indicator displays the Volume Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session the VWAP shall be shown.

ETH session: The VWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the VWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Colors: Different colors can be selected for rising and falling VWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

Update January 03, 2015: Bug removed. Indicator did not work with setting "Monthly".

Category NinjaTrader 7 Indicators

Details: SessionVWAP Bimonthly/Quarterly/Annual V43
Category: NinjaTrader 7 Indicators

January 3rd, 2015
Size: 8.16 KB
Downloaded: 1312 times

Keywords: bands range session twap vwap eth rth standarddeviation variance

SessionTWAP Monthly V43

Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later

The indicator displays the Time Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session theTWAP shall be shown.

Use with time-based charts: On minute and second chart, it will use an equal weight for all bars to calculate the average price of the selected session.

Use with tick based charts: On tick based charts it will apply a weight to each bar, which is the smaller of (timestamp of current bar - timestamp of previous bar) and (timestamp of current bar - session start time). There is one specific case, where this may cause a problem. The technical break of CME index futures from 3:15 PM to 3:30 PM CT is not taken into account by the session template, if an ETH session is used. In this case the first bar after the break will be overweighted. To avoid that problem use the default setting for the technical break for Globex index futures, which will eliminate the impact of the technical break.

ETH session: The TWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the TWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Public Holidays: For Globex instruments the indicator will display the ETH TWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar.

Colors: Different colors can be selected for rising and falling TWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.

Category NinjaTrader 7 Indicators

Details: SessionTWAP Monthly V43
Category: NinjaTrader 7 Indicators

December 28th, 2014
Size: 9.10 KB
Downloaded: 1188 times

Keywords: bands range session twap vwap eth rth standarddeviation variance

SessionTWAP Weekly V43

Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later

The indicator displays the Time Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session theTWAP shall be shown.

Use with time-based charts: On minute and second chart, it will use an equal weight for all bars to calculate the average price of the selected session.

Use with tick based charts: On tick based charts it will apply a weight to each bar, which is the smaller of (timestamp of current bar - timestamp of previous bar) and (timestamp of current bar - session start time). There is one specific case, where this may cause a problem. The technical break of CME index futures from 3:15 PM to 3:30 PM CT is not taken into account by the session template, if an ETH session is used. In this case the first bar after the break will be overweighted. To avoid that problem use the default setting for the technical break for Globex index futures, which will eliminate the impact of the technical break.

ETH session: The TWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the TWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Public Holidays: For Globex instruments the indicator will display the ETH TWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar.

Colors: Different colors can be selected for rising and falling TWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.

Category NinjaTrader 7 Indicators

Details: SessionTWAP Weekly V43
Category: NinjaTrader 7 Indicators

December 28th, 2014
Size: 9.14 KB
Downloaded: 1321 times

Keywords: bands range session twap vwap eth rth standarddeviation variance

SessionTWAP Daily V43

Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later

The indicator displays the Time Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session theTWAP shall be shown.

Use with time-based charts: On minute and second chart, it will use an equal weight for all bars to calculate the average price of the selected session.

Use with tick based charts: On tick based charts it will apply a weight to each bar, which is the smaller of (timestamp of current bar - timestamp of previous bar) and (timestamp of current bar - session start time). There is one specific case, where this may cause a problem. The technical break of CME index futures from 3:15 PM to 3:30 PM CT is not taken into account by the session template, if an ETH session is used. In this case the first bar after the break will be overweighted. To avoid that problem use the default setting for the technical break for Globex index futures, which will eliminate the impact of the technical break.

ETH session: The TWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the TWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

RTH multi: The TWAP will be displayed starting from the open of the RTH session as specified and then continue through the after session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Public Holidays: For Globex instruments the indicator will display the ETH TWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar.

Colors: Different colors can be selected for rising and falling TWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

Update Jan 23, 2011: Globex holiday calendar for 2011 added. Holiday sessions will only be applied to Globex instruments. Indicators now also work on tick and volume charts.
Update May 17, 2011: New signature for GetNextBeginEnd() implemented.
Update June 15,2011: TWAP can now be displayed for RTH and after-session, see option RTH-multi. Three different types of TWAP bands added.
Update July 26, 2011: SessionTWAP uses (high + low + open + close) / 4 for higher accuracy. Adapted to different plot styles.
Update January 25, 2012: Globex holiday calendar for 2012 added. Small bug removed, which had affected the plot colors.
Update July 4, 2012: Serialization of plot parameters changed.
Update February 23, 2013: Plot recoded & CPU efficiency improved, Globex holiday calendar for 2013 added.
Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.

Category NinjaTrader 7 Indicators

Details: SessionTWAP Daily V43
Category: NinjaTrader 7 Indicators

December 28th, 2014
Size: 10.22 KB
Downloaded: 3319 times

Keywords: bands range session twap vwap eth rth standarddeviation variance

SessionVWAP Daily V43

Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later

The indicator displays the Volume Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session the VWAP shall be shown.

ETH session: The VWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the VWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

RTH multi: The VWAP will be displayed starting from the open of the RTH session as specified and then continue through the after session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Public Holidays: For Globex instruments the indicator will display the ETH VWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar.

Colors: Different colors can be selected for rising and falling VWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

Update Jan 23, 2011: Globex holiday calendar for 2011 added. Holiday sessions will only be applied to Globex instruments. Indicators now also work on tick and volume charts.
Update May 17, 2011: New signature for GetNextBeginEnd() implemented.
Update June 15, 2011: VWAP can now be displayed for RTH and after-session, see option RTH-multi. Three different types of VWAP bands added.
Update July 26, 2011: SessionVWAP uses (high + low + open + close) / 4 for higher accuracy. Adapted to different plot styles.
Update January 25, 2012: Globex holiday calendar for 2012 added. Small bug removed, which had affected the plot colors.
Update February 23, 2013: Plot recoded & CPU efficiency improved, Globex holiday calendar for 2013 added.
Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.

Category NinjaTrader 7 Indicators

Details: SessionVWAP Daily V43
Category: NinjaTrader 7 Indicators

December 28th, 2014
Size: 9.70 KB
Downloaded: 10902 times

Keywords: bands range session twap vwap eth rth standarddeviation variance

SessionVWAP Monthly V43

Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later

The indicator displays the Volume Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session the VWAP shall be shown.

ETH session: The VWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the VWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Public Holidays: For Globex instruments the indicator will display the ETH VWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar. If tFriday is a holiday with trade date Monday, it will then be integrated into the following week.

Colors: Different colors can be selected for rising and falling VWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

For further details on updates, also see SessionVWAP Daily V43.

Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.

Category NinjaTrader 7 Indicators

Details: SessionVWAP Monthly V43
Category: NinjaTrader 7 Indicators

December 28th, 2014
Size: 8.52 KB
Downloaded: 1918 times

Keywords: bands eth range rth session standarddeviation twap variance vwap

Page 1 of 2