NexusFi: Find Your Edge


Home Menu

 



Categories Help    

Search Results
Searching for entries matching variance, looking in keywords for any words
Found 7 matching entries

Sort by

Entries
SessionVWAP Bimonthly/Quarterly/Annual V43 5 *
Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later

The indicator displays the Volume Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session the VWAP shall be shown.

ETH session: The VWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the VWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Colors: Different colors can be selected for rising and falling VWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

Update January 03, 2015: Bug removed. Indicator did not work with setting "Monthly".


Category NinjaTrader 7 Indicators 
 
Suggest other entries I might like
Details: SessionVWAP Bimonthly/Quarterly/Annual V43
Category: NinjaTrader 7 Indicators 


January 3rd, 2015
Size: 8.16 KB
Downloaded: 1312 times

Keywords: bands range session twap vwap eth rth standarddeviation variance
SessionTWAP Monthly V43 5 *
Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later

The indicator displays the Time Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session theTWAP shall be shown.

Use with time-based charts: On minute and second chart, it will use an equal weight for all bars to calculate the average price of the selected session.

Use with tick based charts: On tick based charts it will apply a weight to each bar, which is the smaller of (timestamp of current bar - timestamp of previous bar) and (timestamp of current bar - session start time). There is one specific case, where this may cause a problem. The technical break of CME index futures from 3:15 PM to 3:30 PM CT is not taken into account by the session template, if an ETH session is used. In this case the first bar after the break will be overweighted. To avoid that problem use the default setting for the technical break for Globex index futures, which will eliminate the impact of the technical break.

ETH session: The TWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the TWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Public Holidays: For Globex instruments the indicator will display the ETH TWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar.

Colors: Different colors can be selected for rising and falling TWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.


Category NinjaTrader 7 Indicators 
 
Suggest other entries I might like
Details: SessionTWAP Monthly V43
Category: NinjaTrader 7 Indicators 


December 28th, 2014
Size: 9.10 KB
Downloaded: 1188 times

Keywords: bands range session twap vwap eth rth standarddeviation variance
SessionTWAP Weekly V43 5 *
Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later

The indicator displays the Time Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session theTWAP shall be shown.

Use with time-based charts: On minute and second chart, it will use an equal weight for all bars to calculate the average price of the selected session.

Use with tick based charts: On tick based charts it will apply a weight to each bar, which is the smaller of (timestamp of current bar - timestamp of previous bar) and (timestamp of current bar - session start time). There is one specific case, where this may cause a problem. The technical break of CME index futures from 3:15 PM to 3:30 PM CT is not taken into account by the session template, if an ETH session is used. In this case the first bar after the break will be overweighted. To avoid that problem use the default setting for the technical break for Globex index futures, which will eliminate the impact of the technical break.

ETH session: The TWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the TWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Public Holidays: For Globex instruments the indicator will display the ETH TWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar.

Colors: Different colors can be selected for rising and falling TWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.


Category NinjaTrader 7 Indicators 
 
Suggest other entries I might like
Details: SessionTWAP Weekly V43
Category: NinjaTrader 7 Indicators 


December 28th, 2014
Size: 9.14 KB
Downloaded: 1321 times

Keywords: bands range session twap vwap eth rth standarddeviation variance
SessionTWAP Daily V43 5 *
Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later

The indicator displays the Time Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session theTWAP shall be shown.

Use with time-based charts:
On minute and second chart, it will use an equal weight for all bars to calculate the average price of the selected session.

Use with tick based charts: On tick based charts it will apply a weight to each bar, which is the smaller of (timestamp of current bar - timestamp of previous bar) and (timestamp of current bar - session start time). There is one specific case, where this may cause a problem. The technical break of CME index futures from 3:15 PM to 3:30 PM CT is not taken into account by the session template, if an ETH session is used. In this case the first bar after the break will be overweighted. To avoid that problem use the default setting for the technical break for Globex index futures, which will eliminate the impact of the technical break.

ETH session: The TWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the TWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

RTH multi: The TWAP will be displayed starting from the open of the RTH session as specified and then continue through the after session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Public Holidays: For Globex instruments the indicator will display the ETH TWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar.

Colors: Different colors can be selected for rising and falling TWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

Update Jan 23, 2011: Globex holiday calendar for 2011 added. Holiday sessions will only be applied to Globex instruments. Indicators now also work on tick and volume charts.
Update May 17, 2011: New signature for GetNextBeginEnd() implemented.
Update June 15,2011: TWAP can now be displayed for RTH and after-session, see option RTH-multi. Three different types of TWAP bands added.
Update July 26, 2011: SessionTWAP uses (high + low + open + close) / 4 for higher accuracy. Adapted to different plot styles.
Update January 25, 2012: Globex holiday calendar for 2012 added. Small bug removed, which had affected the plot colors.
Update July 4, 2012: Serialization of plot parameters changed.
Update February 23, 2013: Plot recoded & CPU efficiency improved, Globex holiday calendar for 2013 added.
Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.


Category NinjaTrader 7 Indicators 
 
Suggest other entries I might like
Details: SessionTWAP Daily V43
Category: NinjaTrader 7 Indicators 


December 28th, 2014
Size: 10.22 KB
Downloaded: 3319 times

Keywords: bands range session twap vwap eth rth standarddeviation variance
SessionVWAP Daily V43 5 *
Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later

The indicator displays the Volume Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session the VWAP shall be shown.

ETH session: The VWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the VWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

RTH multi: The VWAP will be displayed starting from the open of the RTH session as specified and then continue through the after session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Public Holidays: For Globex instruments the indicator will display the ETH VWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar.

Colors: Different colors can be selected for rising and falling VWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

Update Jan 23, 2011: Globex holiday calendar for 2011 added. Holiday sessions will only be applied to Globex instruments. Indicators now also work on tick and volume charts.
Update May 17, 2011: New signature for GetNextBeginEnd() implemented.
Update June 15, 2011: VWAP can now be displayed for RTH and after-session, see option RTH-multi. Three different types of VWAP bands added.
Update July 26, 2011: SessionVWAP uses (high + low + open + close) / 4 for higher accuracy. Adapted to different plot styles.
Update January 25, 2012: Globex holiday calendar for 2012 added. Small bug removed, which had affected the plot colors.
Update February 23, 2013: Plot recoded & CPU efficiency improved, Globex holiday calendar for 2013 added.
Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.


Category NinjaTrader 7 Indicators 
 
Suggest other entries I might like
Details: SessionVWAP Daily V43
Category: NinjaTrader 7 Indicators 


December 28th, 2014
Size: 9.70 KB
Downloaded: 10901 times

Keywords: bands range session twap vwap eth rth standarddeviation variance
SessionVWAP Monthly V43 5 *
Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later

The indicator displays the Volume Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session the VWAP shall be shown.

ETH session: The VWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the VWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance: The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Public Holidays: For Globex instruments the indicator will display the ETH VWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar. If tFriday is a holiday with trade date Monday, it will then be integrated into the following week.

Colors: Different colors can be selected for rising and falling VWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

For further details on updates, also see SessionVWAP Daily V43.

Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.


Category NinjaTrader 7 Indicators 
 
Suggest other entries I might like
Details: SessionVWAP Monthly V43
Category: NinjaTrader 7 Indicators 


December 28th, 2014
Size: 8.52 KB
Downloaded: 1918 times

Keywords: bands eth range rth session standarddeviation twap variance vwap
SessionVWAP Weekly V43 5 *
Exported using NT Version 7.0.1000.26

Indicator will only run on NT 7.0.1000.5 or later

The indicator displays the Volume Weighted Average Price of the selected session. It can be used on all types of charts.

You can apply the indicators to charts with several intraday sessions. You can then select via indicator panel, for which session the VWAP shall be shown.

ETH session: The VWAP will be calculated for the full session, if ETH is selected via indicator dialogue.

RTH session: It is possible to display the VWAP for the RTH session or the night session. Set indicator to RTH and select the number of the session, for example "First" for the night session and "Second" for the RTH session.

Volatility Bands: The indicators has three different modes to calculate volatility bands. For each of the modes multipliers can be selected.

Variance_Price: The variance is calculated from the selected input values of the price bars and the last known value for the VWAP within the current session. This way of calculating the bands is similar to calculating Bollinger Bands with a variable period starting with the first bar of the session.

Variance_Distance:The variance is calculated from the selected input values of the price bars and the value for the VWAP corresponding to price. It is a variance of the vertical distance of price from VWAP. This method corrects for a trend and produces slightly narrower bands on a trending day.

Session_Range: The quarter range of the current session is used as a measure of volatility instead of the standard deviation.

Public Holidays: For Globex instruments the indicator will display the ETH VWAP for the two-day-session including a public holiday. The indicator is preconfigured for the Globex holiday calendar. If tFriday is a holiday with trade date Monday, it will then be integrated into the following week.

Colors: Different colors can be selected for rising and falling VWAP. Also colors and opacities can be selected for the areas between the inner bands, middle bands and outer bands.

For further details on updates, also see the SessionVWAP Daily V43.

Update January 25, 2012: Minor enhancements. Small bug removed, which had affected the plot colors.
Update February 23, 2013: Plot recoded & CPU efficiency improved, Globex holiday calendar for 2013 added.
Update March 30, 2013: Algorithm improved for both speed and accuracy. VWAP start time can be selected.
Update April 11, 2013: Plot modified for compatibility with charts built from multiple bar series.
Update May 10, 2013: Bug removed, which led to occasional false identification of the RTH session on charts built from ticks.
Update December 9, 2013: Holiday calendar added for 2014.
Update December 28, 2014: Holiday calendar added for 2015. Price markers improved for US interest rate futures.


Category NinjaTrader 7 Indicators 
 
Suggest other entries I might like
Details: SessionVWAP Weekly V43
Category: NinjaTrader 7 Indicators 


December 28th, 2014
Size: 8.56 KB
Downloaded: 2954 times

Keywords: bands eth range rth session standarddeviation twap variance vwap
 


 
Category
 




© 2024 NexusFi™, s.a., All Rights Reserved.
Av Ricardo J. Alfaro, Century Tower, Panama City, Panama, Ph: +507 833-9432 (Panama and Intl), +1 888-312-3001 (USA and Canada)
All information is for educational use only and is not investment advice. There is a substantial risk of loss in trading commodity futures, stocks, options and foreign exchange products. Past performance is not indicative of future results.
About Us - Contact Us - Site Rules, Acceptable Use, and Terms and Conditions - Privacy Policy - Downloads - Top